ultron UAI-100 Manuel page 7

UAI-100
Adapter
IDE – SATA
Overall Features:
– Compatible with Ultra ATA 133 / 100 / 66 / 33 specifications
– Supports all types of ATATPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ...)
– 100% hardware bridge converter to support PC, MAC and Linux environment
Serial ATA Features:
– Compliant with Serial ATA 1.0 specifications
– Supports Serial ATA Generation 1 transfer rate 1.5Gb/s
Notes:
Note 1: IDE device must be set on Master Mode.
Note 2: Please make sure that your PC is shut down during your hardware installation.
Note 3: The PATA-SATA Converter with your IDE device is no hot swap device.
Hardware Installation:
1. Connect the PATA to SATA Converter to your IDE device,
please mind the direction of IDE port.
2. Plug the 4 PIN power cable into PATA to SATA Converter.
3. Connect the 4 PIN power cable to your IDE device.
4. Connect a SATA cable to PATA to SATA Converter and remember
to plug the other connector of the cable into your computer.
After the successful installation of the adapter, you can restart your PC.
All manuals and user guides at all-guides.com
3 Jahre Herstellergarantie für Deutschland
3 years manufacturers warranty for Germany
3 ans de garantie du fabricant pour l'Allemagne