Publicité
Les langues disponibles
Les langues disponibles
Inside Push Button
PRESS & HOLD
TUNE - 1 SEC
SYNC - 3 SEC
RESET - 10 SEC
VOLUME
Strobe Chime
Tune Setting Table
Tune
D i n g ( 2 F l a s h e s -
Pause - 2 Flashes)
Ding-Dong (4 Flashes -
Pause - 4 Flashes)
– or –
Westminster (8 Flashes
- Pause - 8 Flashes)
Helpful Videos – www.hzsupport.com
Tune / Strobe Settings
The chime has different selectable tunes: Ding
(one note tune), Ding-Dong (two note tune), or
Westminster (eight note tune). The factory set-
ting is for the Westminster tune. This tune can
be changed by following the instructions in the
Tune Setting Table.
Note: All chime models are designed to work with
up to 5 push buttons (sold separately). All chimes
are designed to play only two different tunes no
matter how many push buttons are used.
Push Button
Jumper - ON
Jumper - OFF
Chime
———
Press button on chime. Listen
for single "Beep" tone and one
strobe flash. Release button.
Listen for selected tune. Repeat
to select different tune.
Helpful Answers – 1-800-858-8501
3
Publicité
