Télécharger Imprimer la page

BOERPLAY BBPE061.0A Instructions D'installation page 5

Publicité

Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zijn bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Assembleer de overige modules met behulp van de moduletekeningen
3 - Plaats 10,14,15(2x),16,17,18(2x),19,20
4 - Plaats 1,3(2x),4,6(3x),12(2x),13, verbind deze aan 19
5 - Plaats 5(2x)8,9,11 verbind deze aan toren
6 - Plaats 2, verbind deze aan 1
7 - Plaats 7, verbind deze aan 19
8 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
9 - Dicht de gaten en verdicht het zand
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
4
6
9
8
5
Benaming
Speelhuis
Title
Opmerking
Boer Basic Play
Comment
Datum
15-11-2022
Date
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Assembly sequence:
1 - Dig the holes according to the ground plan
2 - Assemble the remaining modules using the module drawings
3 - Place 10,14,15(2x),16,17,18(2x),19,20
4 - Place 1,3(2x),4,6(3x),12(2x),13, attach it to 19
5 - Place 5(2x),8,9,11 attach it to tower
6 - Place 2 attach it 1
7 - Place 7 attach it to 19
8 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
9 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment
14
7
Typeplaatje
B
Identification plate
3
19
5
12
1
11
TOE BBP 061 0A
Tekening
Drawing
10
17
20
16
15
18
2
A
Modules Modules

Publicité

loading