COFAN 0900 0401 Guide D'utilisation page 17

15
4. Warnings.
(1)The power tools are not generally insulated for coming into contact with electric power
sources.
(2)The power tools shall not be used in explosive atmospheres unless specially designed for
that purpose.
(3) Special precautions shall be taken when working in explosive atmospheres.
(4) Working with a percussive tool can generate dust which, depending on the material being
worked on, could be harmful to the operator.
(5)The inserted tool on heavy types of percussive non-rotary power tools, e.g. breakers, is
exposed to heavy strains and can after a long period of use break due to fatigue.
(6) The unexpected tool movement or breakage of inserted tool may cause injuries to the lower
limbs, in particular the feet.
(7) The unsuitable postures may not allow counteracting of normal or unexpected movement of
the power tool. A working position shall be adopted which remains stable in the event of a
break up of the inserted tool.
(8) Holding the inserted tool by the free hand can be a source of vibration damage.
(9) The power tools shall be isolated from the energy source before changing the inserted tool.
(10) Pay attention to the risk of a whipping compressed air hose.
5. Instructions.
(1) On suitable postures to counteract the effects of a sudden break of the inserted tool.
(2) Release the start and stop device in the case of an interruption of the energy supply.
(3) Only lubricants recommended by the manufacturer shall be used.
ENGLISH