Publicité
Les langues disponibles
Les langues disponibles
EN
INSTRUCTIONS MANUAL
Ref. TE UNI 220
IMPULSE RELAY 230V~ 50Hz
Ref. TE UNI 024
IMPULSE RELAY 24V~ 50Hz
TECHNICAL CHARACTERISTICS
Reference
Control voltage:
Contact
Switching Capacity
LED
230V Incandescent /
Halogens
12V Halogens
with transformer
Fluorescent tubes
Pushbuttons
with glow lamp
Coil consumption
Minimum time
between impulses
Minimum time
between impulses
Mechanical lifetime
Electrical lifetime
Dimensions
Working temperature
According
to the Standard
DESCRIPTION
● Impulse relay with 1 NO free-voltage contact.
● Installation in junction box.
● The output contact changes its status when the coil is supplied
through the pushbutton. That is, a press closes its contact and the
next press opens it.
● Unlike a contactor, the coil of the switch does not remain under
voltage and there is no permanent power consumption.
● Very low sound level, so silence.
● Application examples: hotel and hospital rooms, homes, corridors,
etc.
**NOTE: It is possible to use the accessory AC DM- 003 to increase
the number of pushbuttons with glow lamp, although this reduces
the response frequency of the impulse relay.
DIMENSIONS
WIRING DIAGRAMS
Work with electrical equipment on the 230V mains
must be carried out exclusively by qualified
technicians!.
Disconnect the mains voltage before proceeding to the
assembly, disassembly or manipulation of the
electrical device!.
● Follow one of the following wiring diagrams at the time of the
electrical installation:
Installation of TE UNI 220.
L
230V~ 50Hz
N
Installation of TE UNI 024.
- With load supplied to 24V.
~
24V
~
- With load supplied to 230V.
~
24V
~
~
230V
~
DINUY, S.A. Auzolan, 2, 20303, IRUN, SPAIN
600W (60µF)
With maximum load: > 200.000 cycles
46 x 32 x 19mm (without fixing straps)
32
19
WARNING: Hazardous voltage!.
A1
A1
A1
Declaration of conformity CE
www.dinuy.com
TE UNI 220
230V~ 50Hz
NO Unipolar free-voltage contact
10A / 230V~
400W
2.000W
1.000W
Up to 3 (up to 10 with AC DM- 003)
Working: 0VA
Pulsation: 50mW
0,1sec (maximum 20 per minute)
> 1 million cycles
61 x 32 x 19mm (with fixing straps)
-20ºC ~ +45ºC
EN 60669-2-1
TE UNI 220
230V~ 50Hz
10A 250V~
A1
A2
46
61
TE UNI 220
230V~ 50Hz
A2
TE UNI 024
24V
10A 250V~
A2
TE UNI 024
24V
10A 250V~
A2
Guarantee
TE UNI 024
24V~ 50Hz // 24Vcc
8A / 24V
------
------
------
------
0,05sec
10A 250V~
8A 24V
8A 24V
Publicité
