HeathCo JourneyMan Serie Mode D'emploi page 5

Installation
Caution: before starting the installation, turn the power off at the
If you want to use the Manual Override feature you will need to install the fixture on a circuit controlled
by a switch.
❒
Loosen the thumbscrews holding the sensor
head and lampheads.
❒
Adjust the various parts so that the fixture
looks similar to this illustration.
❒
Finger tighten the thumbscrews at this time.
598-1187-02
Get user manuals: See SafeManuals.com
CirCuit breaker.
Wall Mount Eave Mount
❒
Loosen the thumbscrews holding the sensor
head and lampheads.
❒
Adjust the various parts so that the fixture
looks similar to this illustration.
❒
Finger tighten the thumbscrews at this time.
-5-