TYPHOON EASY CAM Mode D'emploi page 7

9. The installation will then assign the drivers to the newly inserted camera.
10. Next and last, click on the "Finish" button to end the installation.
All specifications and information are subject to changes without further notices
All manuals and user guides at all-guides.com
TYPHOON EASY CAM
Article No: 50946
12
Notes: please check followings for correct installation:
1.
Confirm USB interface in PC;
2.
Check the USB interface and see if it is working well;
3.
Check method: Click on Control panel System
"Universal serial bus controllers" list if it exist, and whether it works normal.
4.
Ensure there are no red or yellow icons in front of each USB controller list.
5.
Next, check if Windows have detected and install the camera correctly. Go to the Imaging Device list and see if "VGA SoC
PC-Camer@" line appears in it. If it does then installation is successful.
Using the Camera:
Note: The driver and software must be installed first, and then connect as following.
1. Double click on VP-Eye icon on the desktop, and the preview image will appear in the main Window.
2. The VP-Eye software contains many functions
and these are available from the main VP-Eye
screen.
Hardware button Device manager tab, check the