Conceptronic CPOWERB2200 Mode D'emploi page 7

All manuals and user guides at all-guides.com
4.1 Charging the power bank
You need to charge the power bank before you can use it. You can charge the power
bank through the USB port on your computer, or through a USB power adapter, like
the Conceptronic CUAPTFOLD or CUAPTTRAV.
 Pull the USB connector [F] from the bottom of the power bank.
 Connect the USB connector to a free USB port on your computer, or to a free USB
port on your USB power adapter.
The charging LED [B] will turn orange, indicating that the power bank is charging.
The capacity LEDs [A] show the capacity of the power bank. When all 4 capacity
LEDs are lit and the charging LED is green, the power bank is fully charged.
Note: A full charge of the power bank can take up to 5 hours.
 Disconnect the USB connector from your computer, or from your USB power
adapter.
 Put the USB connector back in the storage place on the bottom of the power
bank.
4.2 Using the power bank
When the power bank is charged, you can use it to charge your mobile devices, like
your mobile phone, iPod, PSP , etc. Before you can charge your mobile device, you
need to pick the correct tip which fits your mobile device.
Tip: The power bank has 2 USB outputs [E], meaning that you can charge 2
devices at the same time. Note that the capacity of the power bank will be
drained faster when charging 2 devices at the same time.
 Pick the correct tip from the 7 included tips and connect the tip to the USB-to-DC
power cable.
Note: If the tip you need is not included, or if you have a USB charging cable for
your mobile device, you can connect this USB charging cable directly to
one of the 2 USB outputs [E] of the power bank.

Connect the USB-to-DC power cable to one of the 2 USB outputs [E] of the power
bank.

Connect the tip to your mobile device.

Turn on the power bank with the power button [D].
4.Using your power bank
ENGLISH
7