BeeWi BBS020 Mode D'emploi page 7

Search for Bluetooth devices in the phone, select "BeeWi BBS020" on
display and enter the pass key "0000" to add the speaker to the pair list.
When pairing is complete, the blue and red LED light will stop flashing,
and the speaker will automatically connect to the phone and go in standby
mode with the blue light flashing every 3 seconds.
Check the connection by placing a call from your phone.
2.5. Status indicators
Status
Power On
Power Off
Pairing
Standby mode
(Connected)
Standby mode
(Disconnected)
During Communication
Low Battery
Charging
Charging Completed
2.6. Connection
The speaker automatically connects to the last connected device when it is
turned on. If the device is not found, the speaker will connect to a previous
device in the paired list.
In case the connection is not made automatically, it is possible to reconnect
manually either from the speaker by pressing the mFB or from the mobile
device (refer to the phone user manual). It is also possible to disconnect
the speaker either manually or by moving out of range. When losing
All manuals and user guides at all-guides.com
LED
Blue
Red
Blue/Red
Blue
Blue
Blue
Red
Red
Red
Descriptions
3 seconds flash
3 seconds flash, then Off
Alternated blinking
Blinking every 3 seconds
Blinking twice every 3
seconds
Blinking every 6 seconds
Blinking every 3 seconds
Light on
Light off
ENGLISH
7