GameSir G4s Mode D'emploi page 5

Android Mode only
Pressing the" B+HOME" button for 2 seconds to start the gamepad. The difference of this start between the "A+HOME" button is that
the HOME indicator light will turn white and keeps on without mouse mode function.
PC platform
Connection Method (X-Input mode)
a. Plug the 2.4 Ghz USB dongle into the USB port of your devices.
b. Press "X+HOME" button for 2 seconds to start the gamepad.
c. HOME indicator light will turns blue and flashes.
d. HOEM indicator lights will turns blue and keep on when it is connected.
D-Input mode switch
a. Enter into the "X-input" mode, and press the button" A+HOME" can change to D-input mode (HOME indicators will keep on green)
b. Pressing the button "X+HOME" to return to X-input mode.
Switch D-Pad and left joystick
Some of the simulator on PC can not support D-Pad settings. The players can press "L3+Clear" button to switch the D-pad and the left
joystick function. It can be reset when players press these two buttons again.
6
All manuals and user guides at all-guides.com
※Auto Reconnection
When device Bluetooth is on and gamepad is off
Press HOME button for 2 seconds to start gamepad, the gamepad will reconnect with devices automatically.
When device Bluetooth is off and gamepad is on
Open the Bluetooth on devices, the gamepad will reconnect with devices.
When device Bluetooth is off and gamepad is off
Open the Bluetooth is on devices, press HOME button for 2 seconds to start the gamepad, the gamepad will reconnect with device
automatically.
When device is connected by 2.4GHz USB dongle, and gamepad is off.
Pressing HOME button for 2 seconds to start the gamepad, the gamepad will reconnect with devices automatically.
Notes: If you want to connect gamepad with other devices, please match it first.
Wired connection method
Connecting the gamepad according to above instructions, the gamepad enters into the wireless pairing mode first, and connect with
devices by USB dongle. (Android devices should support OTG function if you want to use wired connection)
TURBO Function Introduction
TURBO is semi-automatic, it can create one or more continuous button press.
Setting Method
Pressing one or more buttons (excluding D-Pad, joysticks, SELECT, or START buttons), and press "TURBO "button to set TURBO
function.
7