EN
4
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future
use. If this product is passed to a third party, then these
instructions must be included.
When using the product, basic safety precautions should always be
followed to reduce the risk of injury including the following:
•
Use a level to ensure flat mounting and at the desired height.
•
Check all cables are sufficient length before mounting.
•
Assistance may be required to lift the flat panel.
•
Check for and be careful of in-wall utilities (electrical, plumbing, gas).
•
This product is for Plasma/LCD displays having up 13 - 32"
(33 - 81 cm) diagonal screen weighing up to 55 lbs (25 kg).
•
This product if for use on vertical walls, mounted onto concrete, brick
or wood stud walls. A wood stud wall should have a minimum of
2 x 4" (5 x 10 cm) studs with a minimum spacing of 16" (40 cm) and
maximum spacing of 24" (60 cm). When mounting onto a drywall
or plaster wall, the wall should have a covering with a maximum
thickness of 0.5" (1.3 cm).
•
For custom installations seek assistance from a qualified installer.
•
For safe mounting, the supporting wall must be able to support
4 times the total weight of the installation. The installer is responsible
for verifying that the wall structure and anchors used will safely
support the total load.
•
Do not use this product for any application other than specified.
•
Faulty installation or assembly or incorrect use of the equipment
could be dangerous.
CAUTION
This wall mount is intended for use only with the
maximum weights indicated. Use with products heavier than stated
maximum load indicated may result in collapse of the mount and its
accessories causing possible injury. Users must remove TV from the
mount before adjustments are made.
IMPORTANT, RETAIN FOR
FUTURE REFERENCE:
READ CAREFULLY