Publicité
Les langues disponibles
Les langues disponibles
Step by step guide
Fitting Detector to Door (Centre-Opening)
Step 1
Using the fixing kit provided with
the detectors
See 'Mounting Diagrams' for
different installations and
mounting kit options
Step 5
Attach cable securely with the
P-clips and screws provided. Avoid
tight bends while providing enough
slack so that cables are not stressed
or stretched as the doors move.
Static Kit Installation diagram for 2D Only
Installation Kit i 616 800-010 for installing a set of 9mm or 15mm profile detectors in a fixed position at either end of the
lift car sill
Sill Bracket attached to car sill
All manuals and user guides at all-guides.com
Step 2
Position the detectors on the
doors approximately 5mm above
car sill
5mm from sill
Short 'L' Bracket attached to Long Bracket
Step 3
Mark or spot through the 5 fixing
holes
Step 4
Remove the detectors from the
door before drilling,
Screw the detector to the door
using the fixing kit provided
Publicité
