Outsunny 84B-345 Instructions De Montage page 6

1.Place all parts on a clean soft sur-
face.
3. Attach the Leg Support (C) to the
Table Legs (B) using Studs (H),Wash-
ers and Nuts (I,J,K).
01
2.Place the Table Top (A) upside
down.Attach the Table Legs on the
Table Top (B) using the Stud (D),Wash-
ers and Nuts(E,F,G).Tighten the Nuts
using the Wrench, DO NOT over tighten
03
4.Tighten all the Nuts using the Wrench
,and add all the protect hats (L,M)
5.Adjust the pre-installed Rubber Pad , (at
the end of each Table Legs) until the Table
is level with the ground.
02
04
05