Daspi PUNTO Manuel D'instructions page 6

generAl sAFeTy rules
Our compliments for your excellent choice. Your new
electromechanical barrier has been produced according to a
high quality and strict reliability, that's why it will assure you
long-lasting performance. This booklet will offer you all the
pieces of information you may need to install your barrier and
to safe guard your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part only,
during the installation and the upkeep. However, the caution
is unquestionably indispensable and nothing is better than
preventing accidents.
imporTAnT
Any installation or repair, or adjustment of the working
machinery by unqualified people is strictly prohibited unless
all the necessary precautions: power supply disconnected
(included possible batteries). All moving mechanism must be
provided with suitable protections.
DASPI is not responsible for any possible damages or injuries
to people, object or animals, caused by any use not provided
for this booklet and/or any unauthorized modification of the
product.
Keep this booklet enclosing it with technical brochure of
installation in a suitable place well-know by all the interested
people. You have to operate the elimination of the packing
material (cardboard, plastic, polystyrene, etc.) in conformity
with the regulations in force, remembering that for a child a
plastic envelope could be extremely dangerous. You have to
s m
ecUriTy ecHANism
iN mOUVemeNT
DisTANce
proDucT Type
The PUNTO barrier has been designed and constructed to
open barrier arms up to 4 meters in length. DASPI does not
assume any responsibility for other use than the intended
use of the PUNTO barrier.
ATTENTION: The PUNTO barrier is not equipped with a
mechanical clutch and therefore when installed must be
connected to a special DASPI control unit or to a control
unit equipped with an electronic clutch.
use oF The mechAnism
Important safety instructions
Attention, for personnel safety it is of vital importance to
carry out the following instructions.
Keep these instructions in a safe place. Do not allow children
to play with the fixed or remote controls of the gate. Place
the remote controls out of the reach of children.
As the mechanism can be controlled nearby or at a
distance using push buttons or remote controls it is
indispensable that the efficiency of all safety devices
be checked frequently. We recommend periodical checks
(every six months) by qualified personnel to adjust the
electronic clutch. To adjust this protection device, see the
paragraph "Electronic clutch adjustment" in the instruction
manual of the electronic control unit.
preliminAry checks
• Read carefully all parts of this manual.
• Check that the product was not damaged during
transportation.
• Check that the electrical plant conforms to the
characteristics required by the gear motor.
All manuals and user guides at all-guides.com
english
D e
O NOT iNsTAll THe lecTric sHOcK
AUTOmATiON iN PlAce fUll
Of exPlOsiVe mOisTUres
teach the people employed in using the automation about the
control and security systems of the installation.
Don't install this product in explosive places.
upkeep
For any kind of upkeep, you have always to cut off the power
supply.
For a correct upkeep of the installation where you have installed
PUNTO barrier follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the
paragraph "installation of the electronic central unit").
In case of malfunction going and seeing qualified people.
DemoliTion
You have to operate the elimination of the materials in
conformity with the regulations in force. All material must be
divided by type (copper, aluminium, plastic, electrical central
unit). However there are not materials considered dangerous
for the handler.
DismAnTling
In order to dismantle or to move away the automation, follow
these instructions:
Cut off the power supply and disconnect the electrical installation.
Dismantle the control console and all the other components of
the installation. If you have noticed that some components have
been damaged, you have to replace them.
U
se
THe glOVes
• Check that an adequate grounding plant exists and that
all metallic parts are connected to this plant.
• We remind you that the mechanism facilitates use of the
barrier and does not resolve problems due to defects, bad
installation or lack of maintenance to the barrier.
lubricATion
The PUNTO barriers are supplied with permanent grease
lubrication
insTAllATion
Important safety instructions for installation.
Warning: A bad installation can cause a great deal of
damage or harm. Scrupulously follow all installation
instructions.
ATTENTION: For any reason whatsoever never disassemble
the barrier arm when it is in a horizontal position
ATTENTION: For any reason whatsoever never carry out
an emergency or manual manoeuvre if the barrier arm is
not assembled
ATTENTION: Do not release the motor when it's working
For correct commissioning of the PUNTO barriers, proceed
as follows:
Locate the point inside the property where the PUNTO
barrier will be installed (figure 1).
Construct a solid concrete base with the dimensions
illustrated on figure 1; provide a passage for the sheath
"G" of the power cables and system controls.
Before the concrete sets, position the " Ps" plate (OPTIONAL)
well down into the concrete making sure that the plate is
correctly oriented and perfectly horizontal on both axis
(picture 1).
U K
se glAsses eeP THe PrOTecTiON
fOr WelDiNg cArTer