Location and Operation of controls
1.
TINT
Adjust the TINT control for the proper color phase or flesh tones. When
turned counterclockwise, the skin tone becomes reddish. When turned
clockwise, skin tone becomes greenish.
2.
SHARPNESS
Adjust the SHARPNESS control to obtain the clearest picture.
3.
COLOR
Adjust the COLOR control to set the color saturation level. Turn the con-
trol clockwise to increase and counterclockwise to decrease.
4.
BRIGHTNESS
Adjust the BRIGHTNESS control for the desired overall display bright-
ness. This control is also useful to compensate for differences in area
lighting. Turn the control clockwise to increase and counterclockwise to
decrease.
5.
CONTRAST
Adjust the CONTRAST control for the desired overall contrast. Proper
adjustment will allow maximum gradations between the darkest and light-
est picture areas. Turn the control clockwise to increase and counterclock-
wise to decrease.
6.
VOLUME
Adjust the VOLUME control for the desired audio level. Turn the control
clockwise to increase and counterclockwise to decrease.
7.
VIDEO 1 TACT SWITCH
Set the switch to VIDEO 1 if the camera jack is used.
8.
VIDEO 2 TACT SWITCH
Set the switch to VIDEO 2 if the camera jack is used.
9.
S-VIDEO TACT SWITCH
Set the switch to S-VHS if the S-VIDEO jack is used.
8