Garden Treasures S-582DND Mode D'emploi page 5

ASSEMBLY INSTRUCTIONS
4. Place the wind vent canopy (E) over the top
of the canopy frame (B), slipping poles into
pockets in the wind vent canopy (E). Place
the large canopy (F) over the canopy frame
(B). Make sure top edges of the large
canopy (F) are completely covered by wind
vent canopy (E).
5. Place the assembled canopy frame (B) on
top of the assembled crossbars. Line up the
holes. Insert an M6 x 30 L bolts (AA) through
the crossbar, through the angled bracket and
secure with an M6 nut (CC) for each. Repeat
procedure for each corner. Tighten all bolts.
Hang the "S" hook (E) on the canopy frame
(B) for each.
Hardware Used
AA M6 x 30 L Bolt
AA
M6 Nut
CC
AA
EE
AA "S" Hook
6. Pull down the edges of the large canopy (F)
and fasten hook and loop straps around the
crossbars. Secure the gazebo to the ground
by inserting the lawn stakes (DD) through
the side panel posts (A) and into the ground.
Hardware Used
Lawn Stake
DD
AA
All manuals and user guides at all-guides.com
x 16
x 16
x 4
x 8
5
4
E
5
AA
C
CC
6
DD
Lowes.com/gardentreasures
F
B
B
D
EE
F
A