Manuels Connexes pour Audipack FLEX-1841
Sommaire des Matières pour Audipack FLEX-1841
- Page 1 Wallmount for horizontal mounting bar Muurbeugel voor horizontale montagebalk Installation manual Montage handleiding FLEX-1841 © Audipack...
- Page 2 Mount the bracket to the desired wall using the provided mounting holes. (Fastening materials not included) Monteer de beugel tegen een gewenste wand. (Bevestiging materiaal niet inbegrepen)
- Page 3 Place the horizontal mounting bar. Plaats de horizontale montage balk. Place the strips as shown. Plaats de strippen als aangegeven.
- Page 4 Place the horizontal mounting bar with strips as shown. Plaats de horizontale montage balk met strippen als aangegeven.
- Page 5 Place bolts and spring washers as shown. Plaats bouten en veer ringen als aangegeven.
- Page 6 Place bolts and spring washers as shown. Plaats bouten en veer ringen als aangegeven.
- Page 7 FLEX-1841 ready to receive FLEX mounting arms (not included) FLEX-1841 gereed om FLEX montage armen te monteren (niet inbegrepen)
- Page 8 Audipack reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Audipack be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Audipack has been advised of, known, or should have known, the possibility of such damages.