Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
FRAMING NAILER
BEFORE LOADING OR UNLOADING FASTENERS, MAKE
SURE THE TOOL IS DISCONNECTED FROM THE AIR
SUPPLY, THE TRIGGER IS NOT DEPRESSED, AND THE
TOOL IS NOT POINTING TOWARD ANYONE.
1. Pull back on nail switch release latch until you hear the latch
click and it's locked in place.
2. Insert nails into magazine.
NOTE: Before inserting any nails into the gun, make sure you are
using the proper nail with the proper nail gun. If the incorrect
nail is used bodily injury or property damage may occur. Make
sure that the nail is facing the proper direction with the tip facing
down toward the bottom of the magazine and the head of the
nail facing up toward the top of the magazine. Please consult
your retailer if you have any questions on which nail is the correct
one to be used with this tool or how to place the nails properly
into the magazine.
3 Press forward on the nail switch release latch so that it slides
forward until it makes contact with the inserted fasteners. It's
recommended to test fire the fastener on a scrap piece of wood
to make sure the depth setting on the nailer is set properly.
All manuals and user guides at all-guides.com
7
1
2
3
www.lowes.com
R
Publicité
