Sherwood DS-N10A Mode D'emploi page 10

Operation
Turning on power
1
Connect one end of the power adapter to DC 12V on the
rear side of the main unit.
2
Connect the power plug to the AC wall socket.
3
Press on the system to turn on the main unit. Or press
on the remote control to turn on power.
Note
Do not use any AC adapter other than the one included with this unit.
Installing the antenna
1
Connect the radio antenna into FM antenna terminal.
2
Connect the other end of the radio antenna to outdoor
FM radio antenna.
3
Place the radio antenna where FM signal is strong.
10
All manuals and user guides at all-guides.com
Installing the application
1
Visit Play Store TM on your Android
2
Search for DS-N10.
3
Download and install the application on your Android
smartphone.
Pairing the application and the main unit
through Bluetooth
1
Go to Wireless & networks settings in your Android
smartphone.
2
Go to Bluetooth settings.
3
Search for and select DS-N10.
4
Enter 0000 for PIN.
5
Run the application.
Note
The application might not work in some Android
depending on specifications, e.g. Android
TM Smartphone.
TM
TM
TM smartphones
TM OS version.