Oehlbach PROIN 8410 Mode D'emploi page 3

Oehlbach® HDMI™ Network Extender
EN - Operating instructions
Item 8410
Thank you for buying an Oehlbach® quality product.
General
The OEHLBACH® HDMI™ Network Extender (item 8410) allows you to
transfer high-resolution HDMI™ signals via a CAT7 cable up to
50m (with a resolution of 1080p).
Purchased parts package
1 x transmitter, 1 x receiver, 1 x mains adaptor
Connecting the transmitter
Connect the source device
using an HDMI™ cable with the
transmitter's input (HDMI IN).
Connecting the receiver
Connect the target device using
an HDMI™ cable with the
receiver's output (HDMI™ OUT).
Connecting the transmitter with the receiver
Using two CAT6/7 cables create a connection
between plugs 1 and 2 between the transmitter
and the receiver. Connect the enclosed mains
adaptor with the receiver.
The red power LED should light up. If there is a
signal at the transmitter's input (HDMI™ IN)
then the blue status LED lights up.
You have now connected the transmitter with the OEHLBACH® HDMI™ Network Extender's
receiver.
Technical details
- Supports high-resolution HDMI™ signals
- Supports the following audio formats
LPCM, Dolby-AC3, DTS 7.1, DSD
- 1080p with a cable length up to 50 m via two CAT7 cables
- 1080i/720p with a cable length up to 100m via two CAT7 cables
- Gold-plated HDMI™ plugs Type A 19 pin
- Network connectors RJ 45
- Power supply via supplied mains adaptor 5V DC
All manuals and user guides at all-guides.com
3
PRO INSTALLATION
HDMI CAT 6/7-568B
Support
Transmitter Full HD 1080P
DC / 5 V
PRO INSTALLATION
CAT 6/7-568B HDMI
Receiver
Power
Status
Support
Full HD 1080P