Binatone HD-1802 Manuel D'instructions page 5

All manuals and user guides at all-guides.com
SPECIAL SAFETY MEASURES
Please prevent foreign substances from get-
ting inside the hairdryer as it may result in engine
failure and premature failure of the appliance. As
well as electric shock.
Never cover the appliance when in use, take
care to always keep the air filter uncovered and
clean.
Always switch the appliance off prior to plac-
ing it aside even if only for a short period of time.
Avoid direct contact between attachments and the skin of the
head.
Do not use the appliance near the sink or other water sources.
For additional protection it is recommended that you install a
safety shut off protection device with the rated actuating cur-
rent not exceeding 30 mA, into the bathroom's electrical cir-
cuit. We recommend that you consult a specialist.
This appliance is equipped with an automatic overheating pro-
tection feature. When overheated, the appliance switches off
automatically. Unplug the appliance from the power socket.
Cool the device off for several minutes and then switch it on
again. Prior to switching on again please ensure that the
hairdryer's filter is not clogged with fluff, hair, etc. Clean the
grille, if necessary, as described in the present instructions.
PARTS OF THE APPLIANCE
Figure A:
1. Body
2. Outlet nozzle with tourmaline coating
3. Concentrator
4. Detachable rear cap
5. Hanging loop
6. Speed setting switch
7. Heat setting switch
8. Cool shot button
BEFORE USING
THE APPLIANCE
Remove all packaging materials from the appli-
ance.
5