Publicité
Les langues disponibles
Les langues disponibles
reach, you may use an extension cord rated for a minimum of 1875
Watts.
Operation
Three switches provide a choice of heat settings. A switch is in the ON
position when the side with the markings on (i.e. I, II, or II) is pushed in.
(Figure 2)
Figure 2
Switch 1 (I) Manual mode
Controls the electricity supply to the heater and flame
manually.
(II) R emote mode
Allows the control of electricity supply to the heater and
flame through the use of the supplied remote control.
!
NOTE: This switch must be in either (I) or (II) to operate
with or without heat.
Switch 2 (I) Provides 715 Watt heat output.
Switch 3 (II) P rovides 1430 Watt heat output with Switch 2.
Remote Operation
The fireplace is supplied with an integral ON/OFF remote control.
!
NOTE: Ensure that the fireplace ON/OFF Switch is set to the
remote control setting (I.E.. II).
All manuals and user guides at all-guides.com
5
3
2
1
Publicité
