TREND NETWORKS VDV II Guide D'utilisation page 4

En
3
WARNING!
Do not attach to AC power or telecoms cables carrying
>60volts. The VDV II Tester may be damaged and cause a
safety hazard to the user.
CAUTION!
Improperly crimped, damaged or un-crimped plugs can damage
the ports on the VDV II Tester. Inspect plugs for proper
termination and crimping before inserting into the tester.
Contacts should always be recessed into the plastic grooves of
the plug. Only use 8-Position plugs with the 8-Pin (DATA) port
and 6-Position plugs with the 6-Pin (VOICE) port.
When is displayed, disconnect immediately to avoid damage.
VOICE
(6 Pin RJ) port
VOICE port
selection
button
Dual Port
Remote Unit
Dual Port Remote Unit
VOICE port
VIDEO
(F-Coax) port
DATA
(8 Pin RJ) port
Dual Port Remote Unit
DATA port
Storage for Coax
Remote Unit
VDV II
ON/OFF
button
Display
VIDEO port
selection
button
DATA port
selection
button
TONE button
158800.02