Wholesale Interiors C6412A-040-7D Serie Instructions De Montage

ASSEMBLY INSTRUCTIONS
MODEL : C6412A-040-7DXX
REVISION : A
Component List
No Descriptions
A Dresser
B Front Right Foot (FR)
C Front Left Foot (FL)
D Rear Right Foot (BR)
E Rear Left Foot (BL)
F Center Support
Hardware List
No Descriptions
1 JCBC Screw M6 x 35mm
2 Spring Washer Ø1/4"
3 Flat Washer Ø1/4" x 20mm
4 L Key M4 x 100mm
ASSEMBLY COMPLETED
A
NOTE : MUST TIGHTEN SCREWS PERIODICALLY WITH USE SCREW WILL BECOME LOOSE.
All manuals and user guides at all-guides.com
STEP 1
Take out assembly instructions sheet, hardware pack and feet packaging from the
drawer which marked with the rope.
Qty
1
1
1
1
1
1
Qty
8
8
8
1
STEP 2
Align & fasten feet (B),(C),(D) and (E) to dresser according to the position left and
right follow the label correctly using bolt (1), lock washer (2) and flat washer (3) and
fully tighten with Allen key (4). Make sure the edges of the feet is on the line mark.
Align and tighten center support (F) to bottom panel of dresser (A).
Line mark
F
C
E
CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
B
STEP 2.1
D
STEP 2.2
DESCRIPTION : DRESSER
3
2
1
Foot
4