Farfisa KP-100 Manuel D'instructions page 6

Connect the microphones
The MIC.1 and MIC.2 sockets are located on the
front part of the KP 100, which can be used to
connect the supplied dynamic microphones,
with an impedance of 600 Ohm. with an impedance of 600 Ohm.
INPUT DC 9 V
- Makes it possible to
power the equipment though an AC/
DC adaptor.
USB TO DEVICE
- Socket for connecting
a USB Flash Drive.
USB TO HOST
- Socket for connecting
the product to a computer using the
supplied cable.
6
All manuals and user guides at all-guides.com
5. MICROPHONES
Microphone volume
Adjust the volume by rotating the MIC.1 LEVEL
and MIC.2 LEVEL knobs located on the front,
next to the sockets.
6. SOCKETS
AUDIO RIGHT and LEFT
- RCA sockets for
connecting the audio externally.
RIGHT
= right audio output;
LEFT
= left audio output.
VIDEO
- Socket for connecting a TV.
MIC.1 MIC.2
and - Sockets for connec-
ting the microphones.