Whispbar K324W Instructions De Montage page 5

EN
Fitting Kit
K324W
Assemble guttermount assembly into leg
(ensure guttermount blade interlocks with
leg).
Using short capscrew and washer, secure
assembly onto leg (use Hex Screwdriver
supplied with crossbar to assist)
Tighten firmly (3Nm).
Use two M5 x 12mm self tapping screws to
secure the leg to the guttermount blade.
Do not over tighten.
Repeat for all legs.
Tighten adjusting screw to 2 Nm (1.5 ft lb)
hand tight.
5