Pegasus 873-9004 Guide D'utilisation Et D'entretien page 8

Installation (continued)
7
Installing the tub spout
□
Wrap thread sealant tape around the pipe
threads of the tub spout (I) outlet in a
clockwise direction, as shown.
□
Thread the spout (I) onto the threaded
connection in a clockwise direction until the
spout (I) becomes ush with the nished wall.
□
Use the strap wrench to tighten the spout (I).
I
8
Removing the plastic cap
□
Before installing the escutcheon (E), remove the
plastic cap from the valve body (D) by twisting
the cap in a clockwise direction.
8
D