Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND MAINTENANCE
It is recommended to have the device checked by the professional service min. once a year. All interventions
must be done by qualifi ed person who is competent for this.
ATTENTION!
The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance keeps longer
useful life and effi ciency of the device. Before cleaning make sure to have disconnected the device from
electricity. Always switch off the main feeder to the device. Stain-less parts wash with moist cleaning cloth
and detergent without groove parts than wash it with clean water and dry it by the cloth. Do not use abrasive
CLEANING AND MAINTENANCE
and corrosive detergents.
It is recommended to have the device checked by the professional service min. once a year. All interventions
WHAT TO DO IN CASE OF BREAK-DOWN
must be done by qualifi ed person who is competent for this.
Switch off the electric feeder and call seller´s proff esional service.
ATTENTION!
INDICATION:
The device cannot be cleaned by direct or pressure water. Clean it daily. Daily maintenance keeps longer
useful life and effi ciency of the device. Before cleaning make sure to have disconnected the device from
Guarentee does not cover all consumption parts succumable to common wear (rubber seals, bulbs, glas and
electricity. Always switch off the main feeder to the device. Stain-less parts wash with moist cleaning cloth
plastic parts etc.). The guarantee does not refer to the devices which were not instaled in correspondance with
and detergent without groove parts than wash it with clean water and dry it by the cloth. Do not use abrasive
instructions - by qualifi ed worker, in confi rmity with standards and when somebody handled incompetently the
and corrosive detergents.
device (interventions into inner equipment) or the device was operated by nonqualifi ed staff or at variance
with instructions for use. Guarantee does not also cover the damages caused due to infl uance of nature or
WHAT TO DO IN CASE OF BREAK-DOWN
other outer intervention.
Switch off the electric feeder and call seller´s proff esional service.
Point for cleaning steel-alloy plate:
INDICATION:
•
Heat up the device
•
Turn of the device
Guarentee does not cover all consumption parts succumable to common wear (rubber seals, bulbs, glas and
•
The plate pull off with scraper
plastic parts etc.). The guarantee does not refer to the devices which were not instaled in correspondance with
•
Apply water to chemistry (RM gril) and clean the plate from residual dirt and sediment
instructions - by qualifi ed worker, in confi rmity with standards and when somebody handled incompetently the
•
Apply pure water (The solution is with vinegar or lemon)
device (interventions into inner equipment) or the device was operated by nonqualifi ed staff or at variance
•
Pull off the water and than to dry the plate with rag
with instructions for use. Guarantee does not also cover the damages caused due to infl uance of nature or
•
Turn on the device up to 70 °C and from the plate let evaporate residual humidity
other outer intervention.
•
To smear the grill areas with vegetable oil
Point for cleaning steel-alloy plate:
•
Heat up the device
Point for cleaning chrome plate:
•
Turn of the device
•
Heat up the device
•
The plate pull off with scraper
•
Turn of the device
•
Apply water to chemistry (RM gril) and clean the plate from residual dirt and sediment
•
The plate pull off with plastic scraper
•
Apply pure water (The solution is with vinegar or lemon)
•
Apply water with a saponate and clean the plate with a sponge
•
Pull off the water and than to dry the plate with rag
•
Apply pure water
•
Turn on the device up to 70 °C and from the plate let evaporate residual humidity
•
Pull off the water and than to dry the plate with rag
•
To smear the grill areas with vegetable oil
•
Turn on the device up to 70 °C and from the plate let evaporate residual humidity
Point for cleaning chrome plate:
•
Heat up the device
•
Turn of the device
•
The plate pull off with plastic scraper
•
Apply water with a saponate and clean the plate with a sponge
•
Apply pure water
•
Pull off the water and than to dry the plate with rag
•
Turn on the device up to 70 °C and from the plate let evaporate residual humidity
13
13
Publicité
