Hotline Merlin Guide D'installation page 2

Connecting it all together
The Merlin can be powered by external 12v battery or a 6v spring top battery.
12v connection
Insert the male jack from
the 12v battery lead into
the socket on the side of
the energiser. Unscrew the
terminals enough to slide
in the fork terminals on
the earth and fence leads.
Securely tighten.
mounting holes, position the
energiser onto the stand.
6v battery insertion
To insert the internal 6v battery, slide out the door to
the battery compartment and place the battery inside,
spring side up. Slide the battery door back into place
securely. If operating primarily from a 12v external
battery, the 6v battery will automatically activate when
the 12v charge drops below 6v.
*Using a high amp hour version of the spring top battery will give you a longer
operation time. Our Part 47PJ6-50
12
Using
13
14