Vinz Magic Manuel D'instructions page 5

Within the terms of the Limited Warranty, if the helmet is found to be
defective in materials or workmanship within twelve months from the date of
purchase, the helmet will be repaired or replaced, at the option of the supplier.
This warranty is only made with the original Purchaser of the helmet and does
not extend to any third parties. The term of this warranty shall commence on
the date of purchase and shall continue through a period of twelve months. In
no event shall this warranty apply
to any helmet replaced thereafter. In the event of a defect covered by this
warranty, the purchaser should return the helmet to the establishment where
the helmet was originally purchased. Except as expressly provided by this
warranty, the supplier shall not be responsible for any incident or consequenti-
al damages associated with a claim under this agreement, whether the claim is
based on contract tort, or otherwise.
1. SIZING AND PROPER POSITIONING
You as a new helmet owner must perform to allow your helmet to protect you
from a head injury. By the time you read this manual, it should have already
been determined that your helmet is of the proper size for your head. Follow
the manual guide to determine if indeed your helmet fits your head. Should
you determine that your helmet is not of the proper size please return to Vinz
Helmets and exchange your helmet with one that fits you. Do not ride with a
helmet that is either too small or too large for your head.
2. DO NOT MODIFY YOUR HELMET IN ANY WAY. IN PARTICULAR
Do not modify the features of your helmet. Do not scratch, cut or perforate
the shell of the helmet. Do not insert screws, and paint it again. Do not apply
paint, decals, gasoline or other solvents to this helmet. Do not modify the
chin strap in any way. Do not remove any of the helmet's rubber rims. Do not
modify in any way to comfort padding. Please remember to use the original
spare parts only.
3. IF YOUR HELMET IS SUBJECTED TO AN IMPACT DO NOT PUT
THE HELMET ON
Never use a helmet that has suffered an impact. Although visible damage may
not appear on the shell the helmet accomplishes its shock absorbing functions
through the alteration and/or partial destruction. In essence,
a helmet is, therefore, unable to perform the functions for which it was desig-
ned after a severe impact. A helmet which has suffered a severe blow should
be discarded and replaced.
LIMITED WARRANTY
WARNING
5