Portfolio DUAL BRITE 4291 Mode D'emploi page 4

COMPLETE THE
INSTALLATION
❒ Stuff the wires into the junction box. Make
sure none of the wires get pinched.
Slide the fixture onto the mounting
screws and tighten nuts.
❒ Install one 100 W max. light bulb.
❒ Install the fixture top. Secure with
decorative screws.
❒ After completing the tests on page 5, caulk
fixture mounting surface with silicone
weather sealant.
❒ Turn on the circuit breaker and light
NOTE: Sensor has a 1
❒ Switch the on-time to TEST position and
Junction Box
• Objects that change temperature rapidly,
• Areas where pets or traffic may trigger
• Nearby large, light-colored objects
The detector is less sensitive to motion di-
rectly towards it and more sensitive to across
motion.
Least Sensitive
4
Get other manuals https://www.bkmanuals.com
TESTING
switch.
riod before it will detect motion. When
first turned on, wait 1
D B switch to the OFF position.
®
UAL RITE
TEST 1 5 10 MIN
ON-TIME
Avoid aiming the control at:
such as heating vents and air condition-
ers. These heat sources could cause false
triggering.
the control.
reflecting light may trigger the shut-off
feature. Do not point other lights at the
sensor.
6 ft.
(1.8 m)
30 ft.
(9.1 m)
Maximum Range
Motion
Sensor
/ minute warm up pe-
1
2
/ minutes.
1
2
OFF 3 6 DUSK TO
HOUR DAWN
150°
Maximum
Coverage Angle
Motion
Most Sensitive
598-1234-01