DigitalZone HDMI 208L Mode D'emploi page 12

NEXD HDMI Splitter
How to use EDID Emulation Mode
1. Dynamic mode
Function
Mode
Number
F1 Normal
F2 Copy
How to set Dynamic mode.
1. Keep touching "F" key on front over 2sec.
2. All LEDs of input1~2 are blinking after pre-registered mode LED blinking.
3. Select No. 1~2.
4. No.1->F1 No.2->F2
5. Selected LED function Number (input1~input2) is blinking and be set. .
12
All manuals and user guides at all-guides.com
Summary
Safety Intersection of all those display
configuration devices
Follow EDID information of the display
1st HDMI Port
device connected 1
Description
st
HDMI output.