Peco T190 Manuel Du Propriétaire page 19

the program back on, see "Turning an Event's Program Off or On" section.
3. Press ▲ or ▼ to scroll to the desired starting time of the event. To select, press PROG once.
(The HEAT icon and temperature digits will start flashing.)
4. Press ▲ or ▼ to scroll to the desired HEAT setpoint temperature of the period. To select,
press PROG once. (The COOL icon and temperature digits will start flashing.)
5. Press ▲ or ▼ to scroll to the desired COOL setpoint temperature of the period. To select,
press PROG once.
Now the next event icon of the same day will start flashing. Repeat steps 3 through 5 to program
each of the remaining events of that day. When all four events of one day have been programmed,
you are taken to the next day of the week.
Every time you push PROG you are kept in a loop that takes you, sequentially, through all 7 days
and 4 time periods per day. When you are done programming, pressing
settings and return the thermostat to Normal Mode.
You may also use the thermostat's "COPY" feature to copy all of an individual day's settings (all
four events) to another day.
All manuals and user guides at all-guides.com
once will save your
19