Publicité
Les langues disponibles
Les langues disponibles
FUNC
After connecting the power, press STANDBY to turn the SOUNDBLASTER M on. Press FUNC repeatedly to choose
TUNER, CD, USB, AUX, SD CARD or BT function.
Energiespar-Funktion
In CD/MP3/USB/SD/AUX/BT mode, when the unit is not providing the main function for 15 minutes, the unit will auto-
matically switch into standby mode. To turn on again, press STANDBY or replug the unit.
EQ
This unit has a built-in equalizer system. Press EQ/LIGHT on the unit or EQ on remote control while playing to select
several EQ presets: FLAT, CLASSIC, ROCK, POP and JAZZ.
Disco-Light
There are 8 light modes of the disco light. Press and hold EQ/LIGHT several times to choose the desired mode (LIGHT
1 - LIGHT 7: one color; LIGHT 8: Disco lights) To turn the disco light off, press and hold EQ/LIGHT until "LIGHT OFF" is
displayed.
Tuning in radio stations
•
Press FUNC to select the tuner function.
•
Extend the antenna to its full length to gain the best possible reception.
•
Tune in any desired station by rotating the tuning knob. the display will show the band frequency. If the radio re-
ceives a stereo signal, STEREO will be displayed.
Automatic scan
Press
to start an automatic station scan. The unit will start to broadcast the P01 after finishing the scan. Press
/
to choose the next programmed station.
Preset memory
It is possible to store up to 30 station presets.
•
Press PROG/P-MODE. P01 will flash on the display. Then rotate the TUNING knob on the unit to select the first
desired station.
•
Press PROG./P-MODE unit, then press
MODE again to confirm your choice.
•
Repeat these steps to store other stations as well. If you store a frequency in any occupied preset location the old
preset will be overwritten.
•
Recall stored preset stations by pressing
This system can playback all digital audio CD/MP3, finalized digital audio CD-Recordable (CD-R) discs, finalized digital
audio CD-Rewritable (CD-RW) discs and CD-DA format digital audio CD/CD-R/CD-RW discs.
•
Press FUNC to select CD mode.
•
Place an audio CD/MP3 DISC into the tray with the printed side facing up.
All manuals and user guides at all-guides.com
Global Functions
Radio operation
/
to choose the desired preset location. Finally, press PROG/P-
/
.
CD / MP3
13
Publicité
