Intellinet Network Solutions 502931 Mode D'emploi page 2

8-Port Rackmount PoE Midspan • User Manual
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
Rackmount PoE Midspan, Model 502931. For a full list of specifications, refer
to the datasheet available at www.intellinet-network.com.
ConneCtions & indiCators
1 2
PD LINK
POWER
1 2 3 4 5 6 7 8
Ports
The lower row of RJ45 ports — Data (In) — on the front panel delivers data
to the Midspan from existing network devices. The upper row of RJ45 ports
— Power + Data (Out) — delivers data while also powering added devices
(up to 15.4 Watts per port). Use standard Cat5 or better Ethernet cables for
connections to PoE-supported IP cameras, wireless access points, other
switches, etc. NOTE: Powered devices should also comply with IEEE 802.3af.
Leds
If an LED doesn't light to
Led
indicate a link or activity,
POWER On
check the corresponding
device for proper setup and
PD Link On
operation.
(1-8)
Power
On the rear panel, plug in the included power
cord and connect the switch to an AC outlet.
Toggle the Power switch to On and confirm that
the Power LED is lit.
raCk Mounting
Simply align the two brackets with the holes on each side panel and secure
them with the included screws. Use the remaining screws to mount the
device in a rack.
2
English
All manuals and user guides at all-guides.com
English
8-port
™
RJ45 10/100 Mbps ports
3 4 5 6 7 8
POWER + DATA (OUT)
DATA (IN)
status operation
Power on
Off Check the AC connection; power on
Port is linked and providing 48 V to a
powered device
Off No link is established
ON
OFF