Urbanears Ralis Mode D'emploi page 4

All manuals and user guides at all-guides.com
English
Rålis features
1 Detachable carry strap
2 Detachable metal front
3 Power cord
4 Previous
5 Play/Pause
6 Next
7 Decrease volume
8 Increase volume
Charge the battery
Caution! Always disconnect the power cord from the power outlet first, before
removing it from the speaker.
– Open the power hatch by pushing it gently.
– Connect the power cord to the speaker input and power outlet.
– When fully charged, the LED indicator will turn green.
See how much charge is left
Quickly press the power button to check the LED indicator.
Green
Yellow
Orange
Red
Don't forget to fully charge Rålis before using it for the first time. 2 hours of
charging gives approximately 20 hours of wireless playtime.
Charge & play: Plug your music source into the speaker's USB power output
to charge while you play.
Connectivity options
– Bluetooth: Press the Bluetooth button for two seconds then select Rålis from
your sound source's Bluetooth menu.
– AUX: Plug in a sound source using a 3.5 mm stereo plug (not included).
– Multi-host: Connect up to two hosts simultaneously for shared DJ duty - or why
not make it three, including an AUX connection. Press Play on a connected
device to select the source as a host. Or switch hosts by pressing the Bluetooth
button on the speaker.
Start listening
– Press the power button for two seconds to turn the speaker on (or off again).
– Connect a sound source via Bluetooth or AUX.
– Press play and enjoy!
9 Bass port
10 Power hatch
11 Power input
12 USB power output
13 3.5 mm stereo AUX input
14 Power on/off
15 LED indicator
16 Bluetooth pairing
®
Fully charged
You're still ok
Charge soon
Time to charge the battery
1