Publicité
Les langues disponibles
Les langues disponibles
Fitting kit
- 2 Ø10 bars
- 2 adjustable short fitting squares
- 2 rings
- 4 L : 30mm holed cylinders
- 4 Ø6 washers
The provided fitting kit being universal, use above listed parts only for the mounting of
Fitting
- Take down the original windshield observing the 4 following points :
1. Dismount wholly the both mirrors. Take care to thread of the mirrors : they are reversed steps (step at left).
2. Unscrew the screw of the top cover shown by the arrow on the under photo.
ERMAX SPORTIVO WINDSHIELD CUT "Ω"
ADAPTABLE ON HONDA SH 125/150 I 2001/2012
Washers Ø6
Rubber washers
Countersunk screw 6×20
- 2 M8 washers
- 2 Ø8 blind nuts
- 2 M8 L : 15m holed screws
- 4 6×20 countersunk screws
- 8 Ø6 wide rubber washers
our windshield on the SH I.
FITTING INSTRUCTIONS
Drilled cylinders
Washer M8
Blind nut
Bars
Ring
Drilled screws
Mirror
Wide washer
Bracket
Publicité
