Publicité
Les langues disponibles
Les langues disponibles
SIRIUS Satellite Radio tuner
Listening to SIRIUS Satellite
Radio
1 1 1 1
5 5 5
This unit can control a SIRIUS Satellite Radio
tuner (sold separately).
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
! With this unit, you can operate one addi-
tional function: SIRIUS channel direct se-
lection. Refer to Selecting a SIRIUS channel
directly on this page.
1 SIRIUS band indicator
Shows the SIRIUS band which has been
selected.
2 SIRIUS channel number indicator
Shows to which SIRIUS channel number
the tuner is tuned.
3 SIRIUS preset number indicator
Shows what SIRIUS preset has been
selected.
4 SIRIUS channel select setting indicator
Shows what channel select setting has
been selected. CH is displayed when
Channel number is selected, and CAT is
displayed when Category is selected.
2 2 2 2
3 3 3 3 4 4 4
5 SIRIUS channel name
Shows the channel name of broadcast
channel.
1
Press SOURCE to select SIRIUS.
Press SOURCE until you see SIRIUS displayed.
2
Press BAND to select a SIRIUS band.
Press BAND repeatedly until the desired SIR-
IUS band is displayed, SR-1, SR-2 or SR-3.
3
To perform tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on page 47.)
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Selecting a SIRIUS channel
directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1
Press DIRECT on the remote control.
CHANNEL INPUT appears in the display.
2
Use 09 on the remote control to input
the desired channel number.
# To cancel the input numbers, press CLEAR on
the remote control.
3
While the input number is displayed,
press DIRECT on the remote control.
The entered SIRIUS channel is selected.
Section
10
45
En
Publicité
