Publicité
Les langues disponibles
Les langues disponibles
COOLER FEATURES AND USE
General Features
Your cooler will automatically maintain the temperature level you select. The
temperature control dial has 7 settings. The thermostat is divided into 7 levels
with a temperature setting in between each one. At first, set the dial to HIGH for
3 hours before adjusting the temperature to your needs.
Cooler Interior Shelf
To adjust, remove or replace a full-width slide-out shelf: (see fig. #4)
1. Remove the tape, gently tilt the shelf up and slide forward until the shelf has been
completely removed.
2. To replace the shelf, gently slide the shelf back.
Auto Defrost
The cooler has an auto defrost feature that activates daily to maintain
continuous performance. During the auto defrost stage, the inside temperature
will slightly increase and resume cooling again after the 30 minute defrost cycle.
Water Collection Pan
The water collection pan is located in the rear of unit; to collect moisture build
up from condensation inside of the cooler. The amount of water is usually
minimal and will generally evaporate naturally. Should water accumulate, you may
simply remove the pan and pour the water out.
CR-48C
MODEL#:
All manuals and user guides at all-guides.com
3
2
1
Low
(warmest)
Fig. 4
Fig. 5
4
5
HIGH
(Coldest)
Page 10 of 12
Publicité
