YURAKU LCD Monitor Serie Mode D'emploi page 5

Hardware Installation
Be carefully to your LCD monitor, it's very exquisite but easy to broken. Turn off LCD's and PC's power before
you set it up. Follow our installation step by step.
Input
【1】AC port：This is for connecting the power cable.
【2】PC In : This can be connected with the D-Sub 15 pin signal Cable.
*【3】DVI port : This can be connected with the DVI signal Cable.
【4】Audio In：This can be connected to the PC audio-out connector of sound resource.
*NOTICE
DVI function is optional feature.
*NOTICE 2
Please adjust your Speaker Volume via your PC computer Speaker Volume control icon. Volume control
will be done thru your PC computer. *Please note that Sound will continue to play when your monitor is
off, to turn off please turn off your PC computer or mute the Speaker Volume control icon.
Control Buttons
There 4 keys for user to set up the monitor, including, "OSD menu ", "Increase<+>","Decrease<->", "Power".
The following descriptions are the introduction of these Keys.
Power: Turn the LCD power on and off. When the power is on, the light is showing green,
stand by will be orange.
Increase < + >: Increase the option value in the OSD menu.
OSD Menu: Press the button to OSD menu, and menu right adjustment.
Decrease < - >: Decrease the option value in the OSD menu.
All manuals and user guides at all-guides.com
5