Publicité
Les langues disponibles
Les langues disponibles
Thank you for purchasing AEMC
This test probe is designed for use with AEMC
Model 6240 and 6255 or equivalent.
For best results from your instrument and for your safety, read the enclosed
operating instructions carefully and comply with the precautions for use. Only
qualified and trained operators should use this product.
Symbols and Definitions
CAUTION - Risk of Danger! Indicates a WARNING. Whenever this symbol
is present, the operator must refer to the user manual before operation
Indicates Important information to acknowledge
This product complies with the Low Voltage & Electromagnetic Compatibility
European directives (73/23/CEE & 89/336/CEE)
The UKCA marking certifies that the product is compliant with the require-
ments that apply in the United Kingdom, specifically regarding Low-Voltage
Safety, Electromagnetic Compatibility, and the Restriction of Hazardous
Substances
In the European Union, this product is subject to a separate collection
system for recycling electrical and electronic components in accordance with
directive WEEE 2002/96/EC
Definition of Measurement Categories (CAT)
CAT IV: Corresponds to measurements performed at the primary electrical
supply (< 1000 V).
Example: primary overcurrent protection devices, ripple control units,
and meters.
CAT III: Corresponds to measurements performed in the building installation
at the distribution level.
Example: hardwired equipment in fixed installation and circuit
breakers.
CAT II:
Corresponds to measurements performed on circuits directly
connected to the electrical distribution system.
Example: measurements on household appliances and portable tools.
Spring Loaded 25 A Probes
1. INTRODUCTION
Instruments Spring Loaded 25 A Kelvin Probes.
®
Instruments Micro-ohmmeters
®
5
Publicité
