Braven FLYE SPORT REFLECT Guide De Démarrage Rapide page 8

WARNINGS, CAUTION & LEGAL INFORMATION
To reduce the risk of fire or electric shock, do not expose the Braven
Earbuds to rain or moisture while charging. The Braven Earbuds
should not be exposed to dripping or splashing, and objects filled with
liquids, such as vases, should not be placed on or near it while being
charged or charging other devices. As with any electronic products,
use care not to spill liquids into any part of the product. Liquids can
cause a failure and/or a fire hazard. The power supply must be used
indoors only. Make no modifications to the product or accessories.
Unauthorized alterations may compromise
compliance, and system performance, and will void the warranty. Do
not place any flame sources, such as lighted candles, on or near the
Braven Earbuds. The Braven Earbuds contains small parts that may
be a choking hazard and is not suitable for children under age 3. Do
not continue charging the battery if it does not reach full charge within
the specified charging time. Overcharging may cause the battery to
become hot, rupture, or ignite. If you see any heat deformation or
leakage, properly dispose of the battery. Do not attempt to charge the
battery in temperatures outside the range of 32°-104°F (0°-40°C). If
the battery begins to leak, do not allow the liquid to come in contact
with your skin or eyes. If contact has been made, wash the affected
area with plenty of water and seek medical attention immediately.
Do not expose the product or battery to excessive heat, including
direct sunlight or fire and storage or use inside cars in hot weather,
8
All manuals and user guides at all-guides.com
where it can be exposed to temperatures in excess of 115°F (60°C).
Doing so may cause the battery and power supply to generate heat,
rupture, or ignite. Using the product in this manner also may result
in a loss of performance and a shortened life expectancy. Extended
exposure to direct sunlight may damage the external appearance
and material qualities. Do not step on, throw, or drop batteries or
the power supply or device, or expose them to a strong shock. Do
not pierce, crush, dent, or deform the batteries or power supply in
safety, regulatory
any way. If either becomes deformed, properly dispose of it. Do not
short-circuit batteries. Do not attempt to service the Braven Earbuds
yourself. Opening or removing covers may expose you to dangerous
voltages or other hazards and will void the manufacturer's warranty.
To prevent risk of fire or electric shock, avoid overloading wall outlets,
extension cords, or integral convenience receptacles. Your Bluetooth
device (mobile phone, music player, tablet, laptop, etc.) must support
the A2DP Bluetooth profile in order to work wirelessly with your new
Braven Earbuds. The A2DP profile is supported by most recent mobile
products with built-in Bluetooth capability. Please refer to your device's
user manual for details and instruction regarding the Bluetooth profiles
it supports.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
ENGLISH
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:—Reorient or relocate the receiving
antenna. —Increase the separation between the equipment and
receiver. —Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. — Consult the dealer or
an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority
to operate the equipment.
FCC RADIATION EXPOSURE STATEMENT: This device complies
Full manual and troubleshooting: braven.com/manuals