ION SnapCam Lite Guide De Démarrage Rapide page 13

Lapse mode.
Turn off the Time Lapse mode when you want to exit the
mode, or the camera will continue taking photos until the
battery depletes or the Time Lapse button is switched to
OFF.
5.4. Recording Videos
Press and hold the Capture button to start recording, the camera
will beep twice indicating recording has started. The LED indicator
illuminates Blue throughout recording.
To stop Recording, press and hold the Capture button again, the
camera will beep for 1 second and the LED will turn off.
Notes:
The Still Photo function is disabled during video recording.
When the memory card is full, the camera will beep 3 times
twice and the LED will flash Blue and Red alternately for 5
seconds.
When your camera battery is low, the status LED will flash
in red. You need to recharge your camera. (Refer to section
4.1)
Notes:
During operation, please do not release MicroSD card from the
card slot as this may damage saved files or cause camera
malfunction.
All manuals and user guides at all-guides.com
EN-13