Publicité
Section 3 - mydlink
1
Device Name
2
Privacy Mode
3
Motion and Person Detection
4
Storage
5
Camera Microphone
6
Night Vision:
7
Anti-Flicker
8
Invert Image
9
Status LED
10
Designated Contact
11
Wi-Fi
12
Time Zone
13
Firmware
14
ONVIF
15
MAC ID
16
Restart Device
17
Remove Device
D-Link DCS-8000LHV3 User Manual
Tap to change the device's name.
Tap to enable. Privacy mode will disable the camera feed.
Tap to set the Motion and Person Detection area and sensitivity settings.
Tap to change the video clips storage location from the microSD card to the cloud. You
can also subscribe to mydlink Cloud from here and view your current subscription plan.
Tap to enable or disable picking up sound near your camera in live view and recordings.
Tap to change night vision detection to On, Off or Auto.
Reduces flicker in the video. Tap 50 Hz or 60 Hz depending on the frequency of your
lights.
Enable this to invert the camera view.
Disable this to turn off LED indicators.
Tap to add, remove, or edit designated contacts for quick phone call upon receiving
a notification.
Tap to change the wireless network this device will use to connect to the Internet.
Note: The network must be the same as all your other mydlink devices that you wish
to use the same account for.
Select the time zone to calibrate your device to.
This displays the installed version of the firmware on your device. Tap to enter the
update settings. You can choose the most suitable time for automatic updates.
Enable ONVIF function to allow other systems to communicate with this camera.
A unique physical address for identifying your device.
Tap this button to restart the device.
Tap this button to disconnect this device from your mydlink account.
DCS-8300LHV3
DCS-8000LHV3-7A6A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
15
Publicité
