Ledvance Dual Selectable Wall Pack Mode D'emploi page 3

Installation Instructions - Back Entry
1. Turn the power off.
3. Open the fixture, disconnect the connection terminals,
and remove the front cover from the fixture.
5. Use a screwdriver to remove the plug. Attach the EVA
cotton pad to the bottom.
7. Mount the front cover back on the fixture.
4196847
2. Use a screwdriver to remove the screws on both sides.
4. Drill mounting holes in the mounting plate with a drill.
6. Lock the fixture on the mounting surface with screws.
Connect to wires to the power supply.
8. Tighten the screws down to secure the front cover
and connect the terminals.