Tools needed
Pliers
Level
BASIC REQUIREMENTS
Make sure you have everything necessary for the proper installation
•
A GROUNDED ELECTRICAL OUTLET is required. Refer to the "Electrical requirements" section on
page 16.
•
A POWER CORD for electric dryers (except for Canada).
•
GAS LINES (if you have a gas dryer) must meet national and local codes.
•
The EXHAUST SYSTEM must be rigid metal or fl exible stiff -walled metal exhaust ducting.
DV457E(G)_02836E-08_EN.indd 11
DV457E(G)_02836E-08_EN.indd 11
Cutting knife
Phillips Screwdriver
English - 11
Pipe wrench
Nut drivers
(gas only)
Duct tape
Wrench
2014-04-28
2014-04-28
6:13:16
6:13:16