Publicité
Liens rapides
© 2009, Videolarm, Inc. All Rights Reserved
R M 7
Vandal-Resistant Recessed Ceiling Dome Housing
Installation and Operation Instructions for the following models:
RM7C2N
IP Network Ready 7" Vandal-Resistant Outdoor Recessed
dome housing, with recessed ceiling mount, clear dome, with
24Vac transformer
RM7T2N
IP Network Ready 7" Vandal-Resistant Outdoor Recessed dome
housing, with recessed ceiling mount, tinted dome, with 24Vac
transformer
IRM7C2N
IP Network Ready 7" Vandal-Resistant Indoor Recessed dome
housing, with recessed ceiling mount, clear dome, with 24Vac
transformer
IRM7T2N
IP Network Ready 7" Vandal-Resistant Indoor Recessed dome
housing, with recessed ceiling mount, tinted dome, with 24Vac
transformer
Before attempting to connect or operate this product,
please read these instructions completely.
All manuals and user guides at all-guides.com
www.videolarm.com
CERTIFIED
81-IN5394
01-15-2009
Publicité
Sommaire des Matières pour Videolarm Moog RM7 Serie
- Page 1 All manuals and user guides at all-guides.com © 2009, Videolarm, Inc. All Rights Reserved R M 7 Vandal-Resistant Recessed Ceiling Dome Housing www.videolarm.com Installation and Operation Instructions for the following models: RM7C2N IP Network Ready 7” Vandal-Resistant Outdoor Recessed dome housing, with recessed ceiling mount, clear dome, with...
- Page 2 All manuals and user guides at all-guides.com IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth.
- Page 3 Purchaser to Videolarm but all claims for warranty service must be made within the The limited warranty stated in these product instructions is subject to all of the following terms and conditions: warranty period.
- Page 4 All manuals and user guides at all-guides.com Electrical Specifications Contents of Box RM7C2N Power 24VAC Class 2 Only RM7C2 ( OUTDOOR ONLY ) 24 VAC 1.8 Amps 54 Watts Total Power: 54 Watts Accessories: Heater: 25 Watts/Blower: 1 Watt Camera Power: 28 Watts English Tools Required:...
- Page 5 All manuals and user guides at all-guides.com 10.375” A box cutter or jigsaw can be used for Using the provided template, mark the cutting the circle. ceiling tile for the cutout. • Con la plantilla proporcionada, cortar el azulejo del •...
- Page 6 All manuals and user guides at all-guides.com Add the safety wire to the flex conduit or Connect the flex conduit to the housing. continue to the next step. • Agregue el alambre de seguridad al conducto de la • Conecte el conducto de la flexión con la flexión o continúe al paso siguiente.
- Page 7 All manuals and user guides at all-guides.com Green Yellow Accessory Power Camera Power Orange The beam angle may be adjusted on the These are recommended maximum distances Camera = red & orange wires to terminal bottom of the unit. Heater/Blower = yellow & green wires to terminal for 24VAC with a 10% voltage drop.
- Page 8 All manuals and user guides at all-guides.com beam angle may be adjusted on the bttom Secure the dome with screws already The security screws provided can also be used in the dome. o the unit. to attach the dome. • Los tornillos de la seguridad proporcionados se pueden •...
- Page 9 All manuals and user guides at all-guides.com Axis 214 Mounting Hole 3026 Mounting (3) #8 x 3/8” Plate Captive 2" Screw Mounting Mounting Hole Hole Install the camera to the mounting plate using (3) 3mm x 12mm bolts and lock washers. Place (3) #8x3/8” screws on the spacers and line up the mounting slots.
- Page 10 All manuals and user guides at all-guides.com AXIS 231-232D Axis 231D/232D Mounting Hole Loosen Screw Mounting Mounting Hole Hole Loosen the screw to the right of the tab by Use the (3) keyhole slots indicated above. approximately (5) turns. • Utilice (3) las ranuras del ojo de la cerradura indicadas •...
- Page 11 All manuals and user guides at all-guides.com Locking Screw Captive (3) #8 x 3/8” Screw Locking Keyhole Pins Slot (3) ½" Position locking pins and locking screw over slots and turn clockwise; secure the screw. Place (3) #8x3/8” screws on the spacers and line up mounting slots. Slide on plate and camera then secure. •...
- Page 12 All manuals and user guides at all-guides.com Open Screw Slots Cable Ties POWER Camera Power (24VAC) Camera Power (24VAC) Orange CONTROL RJ45 Ethernet Connector ALARMS Alarm 1 Blue Alarm 2 Violet Alarm 3 Gray Captive Common White Screw Complete the wiring to camera. Attach the camera assembly to the housing by sliding the (3) This is what the typical path of illumination will look like with the setting at 30 degrees.
- Page 13 All manuals and user guides at all-guides.com Mounting Bracket ½" Now remove the mounting bracket and attach (4) 1/2” spacers (located in the packet that came with the housing) to the base bracket. • Ahora quite el soporte de montaje y una (4) los espaciadores del 1/2"(situados en el paquete que vino con la cubierta) al soporte bajo.
- Page 14 All manuals and user guides at all-guides.com Thumb Screw Locking Screw Keyhole Slots Place quick release plate onto the bottom of the camera. Align the camera locking screws and the keyhole This is what the typical path of illumination will look like with the setting at 30 degrees. slots.
- Page 15 All manuals and user guides at all-guides.com Canon VB-C50IR ½" 2539 Mounting Plate Mounting Captive Hole Screw 1" 2" Mounting Hole Mount the camera to the 2539 plate using the provided hardware. Place (3) 8 x 32 x 3/8 Phillips head screws on the top of the spacer as shown above. Slide plate in and secure. •...
- Page 16 All manuals and user guides at all-guides.com Elmo PTC-200C Captive (3) 8 x 32 x 3/8 Screw 2539 Mounting Plate ½" Mounting Hole 1" 2" Mounting Hole Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided.
- Page 17 All manuals and user guides at all-guides.com Elmo PTC-400C 2539 Mounting Plate ½" Mounting Hole Quick release plate 1" 2" Mounting Hole Attach quick release bracket to mounting plate using (4) #8 screws and star washer. Complete assembly as shown, then secure camera to the quick release plate. •...
- Page 18 All manuals and user guides at all-guides.com JVC VN-C30U 2539 Mounting Plate ½" 2" Mounting Hole Remove the camera plate and mount to the bracket using the (3) metric 3M Phillips head screws. Reattach plate back to the camera. Place the screws on the spacers. Secure the plate and camera. •...
- Page 19 All manuals and user guides at all-guides.com JVC VN-C655U ½" 1" Mounting 2630 Mounting Hole Plate Place the camera on the bracket with the (4) phillips head screws. Use (4) 1” spacers and (4) 1/2” spacers provided. Place the screws on the spacers. Slide on the plate and camera then secure. •...
- Page 20 All manuals and user guides at all-guides.com Pixord 261/262 ½" Mounting 2630 Mounting Hole Plate Install camera to the bracket with (3) 8x32x.5” flat head screws, nuts and washers. Place (3) 8x32x3/8”screws on the spacers. Slide on the plate and camera then secure. •...
- Page 21 All manuals and user guides at all-guides.com Sony SNCRZ30 2" 2539 Mounting Mounting Hole Plate Attach bracket with (1) 1/4x20 bolt, washer and lock washer. Place (3) 8x32x3/8”screws on the spacers. Slide on the plate and camera then secure. • Una el soporte con (1) el perno 1/4x20, la arandela y la arandela de cerradura. Coloque (3) 8x32x3/8" screws en los espaciadores.
- Page 22 All manuals and user guides at all-guides.com Toshiba IK-WB21A Mounting Hole 1" 2" 2539 Mounting Mounting Hole Plate Remove camera bracket and attach to the 2539 plate with (4) 8x32x3/8 bolts and star washers. Place (3) 8x32x3/8”screws on the spacers. Slide on the plate and camera then secure. •...
- Page 23 All manuals and user guides at all-guides.com Product Registration/Warranty Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highest quality products available with unmatched customer service levels that are second-to-none in the security industry.