Publicité
3. Assembly instructions
Step 1.
Attach the handle (A) to the spark guard (B) using an M6 nut(BB).
Tighten the nut using the wrench(CC).
Step 2.
Attach the legs (D) to the fire bowl (C) using an M6×12mm Bolt (AA). Tighten all
screws with a screwdriver.
Step 3.
Place the spark guard (B) over the fire bowl as shown. Keep the poker (E) near
the fire pit to use when needed.
For long lasting use, frequently clean and put a cover for protection.
-10-
Publicité
