Publicité
Les langues disponibles
Les langues disponibles
Method 1
AUDIO
Audio Input Jacks
DVD/VCR
Analog Audio Out
• Method 1 DVD/VCR + Stereo system
• Method 2 DVD/VCR + Dolby Digital decoder or DTS decoder
Notes
¡
If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio out-
put in the setup mode. (See page 38)
¡
If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. (See page 38)
¡
Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out-
put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also
damage the speakers. (See page 38)
¡
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DAT deck.
¡
Set Dolby Digital and DTS to off for audio output in the setup mode for method 1 only. Playing a DVD using incor-
rect settings may generate noise distortion, and may also damage the speakers. (Refer to page 38 to set ON for Dolby
Digital and DTS)
CONNECTION TO AN AUDIO SYSTEM
Stereo system
R
VCR
DVD/VCR
IN
OUT
L
AUDO
R
VIDEO
Get other manuals https://www.bkmanuals.com
Method 2
Digital Audio
L
Input Jacks
DVD
AUDIO
OUT
Digital Audio Out
L
R
– 18 –
Dolby Digital decoder
or
DTS decoder
COAXIAL
DVD
COMPONENT
VIDEO OUT
Y
DIGITAL
S-VIDEO
C
AUDIO OUT
B
OUT
COAXIAL
C
R
EN
2C15
Publicité
