Hikmicro HM-CB-T2 Guide De Démarrage Rapide page 15

Directive 2014/30/EU (EMCD) and Directive
2011/65/EU (RoHS).
Note: The products with the input voltage
of within 50 to 1000 VAC or 75 to 1500 VDC
comply with Directive 2014/35/EU (LVD),
and the rest products comply with Directive
2001/95/EC (GPSD). Please check the
specific power supply information for
reference.
This product and - if applicable -
the supplied accessories too are
marked with "UKCA" and comply
therefore with the following directives:
Electromagnetic Compatibility Regulations
2016, Electrical Equipment (Safety)
Regulations 2016, the Restriction of the Use
of Certain Hazardous Substances in
Electrical and Electronic Equipment
Regulations 2012.
Directive 2012/19/EU (WEEE
Directive): Products marked
with this symbol cannot be
disposed of as unsorted
municipal waste in the European Union. For
proper recycling, return this product to your
local supplier upon the purchase of
equivalent new equipment, or dispose of it
at designated collection points. For more
information see: www.recyclethis.info.
According to the Waste Electrical and
Electronic Equipment Regulations 2013:
Products marked with this symbol cannot
be disposed of as unsorted municipal waste
in the United Kingdom. For proper
recycling, return this product to your local
supplier upon the purchase of equivalent
new equipment, or dispose of it at
designated collection points. For more
information see: www.recyclethis.info.
Safety Instruction
These instructions are intended to ensure
that user can use the product correctly to
avoid danger or property loss. Please read
all the safety information carefully before
using.
Laws and Regulations
Use of the product must be in strict
compliance with the local electrical safety
regulations.
Transportation
● Transportation without the original
wrapper may result in damage on the
device and the company shall not take any
responsibilities.
● Do not drop the product or subject it to
physical shock. Keep the device away from
magnetic interference.
Power Supply
● The input voltage for the device should
meet the Limited Power Source (5 V, 2 A)
according to the IEC62368 standard. Please
refer to technical specifications for detailed
information.
● Make sure the plug is properly connected
to the power socket.
● DO NOT connect multiple devices to one
power adapter, to avoid over-heating or fire
hazards caused by overload.
● For the device without a supplied power
adapter, use the power adapter provided by
a qualified manufacturer. Refer to the
product specification for detailed power
requirements.
Battery
● Dispose of used batteries in conformance
with the instructions provided by the
battery manufacturer.
● CAUTION: Risk of explosion if the battery
is replaced by an incorrect type.
● Improper replacement of the battery with
an incorrect type may defeat a safeguard
(for example, in the case of some lithium
battery types).
● Make sure the battery temperature is
between 0 °C to 45 °C (32 °F to 113 °F)
when charging.
● Confirm there is no flammable material
within 2 m of the charger during charging.
● DO NOT place the battery in the reach of
children.
● Do not dispose of the battery into fire or a
hot oven, or mechanically crush or cut the
battery, which may result in an explosion.
● Do not leave the battery in an extremely
high temperature surrounding environment,
which may result in an explosion or the
leakage of flammable liquid or gas. Avoid
direct sunlight.
● Do not subject the battery to extremely
13